{"title":"DV8 Offroad","description":"\u003cp\u003eDV8 Offroad bumpers, tire carriers and recovery accessories.\u003c\/p\u003e","products":[{"product_id":"dv8-lbjl-13","title":"DV8 2018+ Wrangler JL Push Bar for Mopar Rubicon Steel Bumper – LBJL-13","description":"\u003cp\u003eOur Jeep Wrangler JL Push Bar for the Mopar Rubicon Steel Off-Road Bumper is a low-profile, prerunner-style light mount that keeps your OEM metal bumper clean and functional without towering over the grille. It accommodates up to a single 20\" light bar, eight 3\" pod lights, or four 7\" round lights, and its bar profile does not block the factory front camera. However, the added lights may affect the view. Built to work with factory mounting points and hardware, the bull bar bolts on with no cutting or drilling, clears OEM-recommended winches, and remains compatible with the Mopar front license plate mount. On the trail, the push bar can help deflect light debris and branches away from the grille while keeping wind resistance and overall height in check.\u003c\/p\u003e\n\u003cp\u003eFitment is limited to Wrangler JL models equipped with the Mopar Front Rubicon Steel Off-Road Bumper and is not intended for plastic OE or non-Mopar aftermarket bumpers. Installation is straightforward using the factory hardware. It is finished in a micro-texture black powder coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits up to a 20\" light bar, (8) 3\" POD lights, or (4) 7\" Round lights\u003c\/li\u003e\n\u003cli\u003eWorks with factory hardware\u003c\/li\u003e\n\u003cli\u003eCan help protect the grille from light debris\/branches when off-roading\u003c\/li\u003e\n\u003cli\u003eFits the Mopar Front Rubicon Steel Off-Road Bumper only\u003c\/li\u003e\n\u003cli\u003eWorks with the Mopar license plate mount\u003c\/li\u003e\n\u003cli\u003eLow profile design to help reduce height and block while providing needed light option for the OEM metal bumper\u003c\/li\u003e\n\u003cli\u003eBull bar does not block view from factory camera (added light may block camera view)\u003c\/li\u003e\n\u003cli\u003ePrerunner push bar light mount style\u003c\/li\u003e\n\u003cli\u003eWorks with OEM recommended winches without issue\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625697534133,"sku":"LBJL-13","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/Wrangler-JL-Push-Bar-for-Mopar-Rubicon-Steel-Bumper-1.jpg?v=1793217300"},{"product_id":"dv8-wbpf-02","title":"DV8 Xtract Winch Fairlead – Closed System – WBPF-02","description":"\u003cp\u003eThe DV8 Xtract Winch Fairlead is engineered for strength, safety, and clean winch operation when running synthetic rope. Built around a 1 ¼” thick closed link design, this fairlead provides a secure, centered connection point. Precision CNC-machined from aerospace-grade 7075 aluminum, the Xtract Fairlead delivers an impressive 18,000 lb Working Load Limit, making it suitable for demanding recovery situations. A black military-grade hard anodized finish ensures long-term corrosion resistance and durability in harsh off-road environments.\u003c\/p\u003e\n\u003cp\u003eThe closed link features a Delrin rash guard to protect the link when the line is slack, or cinched tightly against the fairlead, reducing wear. A stainless steel heavy-duty pin provides reliable retention, while the fairlead base plate incorporates alignment nodules that keep the link properly positioned and centered when not in use.\u003c\/p\u003e\n\u003cp\u003eFinished with reverse laser-engraved etching for a clean, durable look, the DV8 Xtract Fairlead is designed exclusively for synthetic winch rope applications. Recommended for use with a soft shackle on the link to prevent damage and maximize system longevity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 1\/4\" thick closed link\u003c\/li\u003e\n\u003cli\u003eBlack military grade hard anodized finish\u003c\/li\u003e\n\u003cli\u003eWorking Load Limit 18,000lbs\u003c\/li\u003e\n\u003cli\u003eCNC machine from high quality aerospace aluminum 7075\u003c\/li\u003e\n\u003cli\u003eFor synthetic winch rope only\u003c\/li\u003e\n\u003cli\u003eReverse laser engraved etching\u003c\/li\u003e\n\u003cli\u003eStainless Steel Heavy Duty Pin\u003c\/li\u003e\n\u003cli\u003eDelrin rash guard on link to prevent damage to link when slack in line or when cinched up against fairlead base plate\u003c\/li\u003e\n\u003cli\u003eFairlead base plate has alignment nodules to keep the link in place and align it when not being used.\u003c\/li\u003e\n\u003cli\u003e***Recommend using with soft shackle on link to prevent damage***\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625697599669,"sku":"WBPF-02","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/DV8-Xtract-Winch-Fairlead-Closed-System-1.jpg?v=1793217307"},{"product_id":"dv8-fbbo-01","title":"DV8 Winch Fairlead Cover Plate – FBBO-01","description":"\u003cp\u003eIf you’re not running a winch on your bumper, our Winch Fairlead Cover Plate cleans up the look of the bumper by covering the fairlead opening. This was designed specifically for DV8 bumpers, but fits many off-road bumpers with standard size hawse style fairlead mounts. The cover plate is made from steel and finished in a micro-texture black powder coat. \u003c\/p\u003e\n\n\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\u003cli\u003e\nCovers Fairlead Hole when Not Using a Winch \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with DV8 Bumpers \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with Many Other Bumpers with Hawse Styles Fairlead Mounts \n\u003c\/li\u003e\n\u003cli\u003e\nSteel Construction \n\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698320565,"sku":"FBBO-01","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/Winch-Fairlead-Cover-Plate-4.jpg?v=1793217320"},{"product_id":"dv8-fbjl-13","title":"DV8 2018-2026 Jeep Wrangler JL \u0026 2020-2026 Gladiator JT OE Plus Front Bumper – FBJL-13","description":"\u003cp\u003eOur OE Plus Series Jeep Wrangler JL and Gladiator Front Bumper maintains the styling of your factory bumper while providing enhanced off-road utility. The removable wings allow you to configure your bumper for a full or stubby width design. The stubby version provides added clearance when rock crawling or on more technical trails, while the full width configuration offers more protection from off-road hazards. The bumper features a recessed winch mount, so you can enhance your Jeep’s vehicle recovery capabilities while increasing airflow to the engine.\u003c\/p\u003e\n\u003cp\u003eThe front bumper provides two light mounts that are compatible with (2) 3-inch pod lights or DV8’s JL \u0026amp; JT 4-inch LED Fog Lights. The included steel bull bar is removable, so you can mount it for extra protection to the front of your Jeep, or keep it uninstalled to retain your Jeep’s factory look. For additional lighting capabilities, you can run DV8's 13-Inch Elite Series LED Single Row Light Bar above the bull bar or our 20-inch Elite Series LED Single Row Light Bar below the bull bar using DV8's Elite Series Light Bar Mount. The bumper comes with a removable winch plate cover to give it a seamless look when you’re not mounting a winch. Our front bumper is compatible with the OEM Jeep tow hooks in equipped vehicles. Made from heavy-duty steel to provide more protection from rocks, shrubs, and trail obstacles over the factory bumper. The micro-texture black powder coat gives our bumper a sleek look that accents the exterior styling of your Jeep. For those that want to hit the trail with confidence without sacrificing the overall appearance of their rig, our JT \u0026amp; JL OE Plus Front Bumper is the perfect upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Please Note:\u003c\/strong\u003e The bumper is not compatible with the factory front skid plate. As a replacement, we recommend DV8’s Sway Bar Disconnect Skid Plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** Please Note:\u003c\/strong\u003e Minor trimming may be required for installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** Please Note:\u003c\/strong\u003e The bull bar and winch may obstruct the front camera in equipped vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRetains OEM Styling\u003c\/li\u003e\n\u003cli\u003eRecessed Winch Mount\u003c\/li\u003e\n\u003cli\u003e(2) 4” Fog Light or 3” Pod Light Mounts\u003c\/li\u003e\n\u003cli\u003eRemovable Wings for a Full or Stubby Width Design\u003c\/li\u003e\n\u003cli\u003eIncluded Steel Bull Bar\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Factory Jeep Tow Hooks (If Equipped)\u003c\/li\u003e\n\u003cli\u003eIncluded Winch Plate Cover for when Winch Mount is Not Utilized\u003c\/li\u003e\n\u003cli\u003e\nCompatible with DV8's 13\" Elite Series Light Bar Above Bull Bar\n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with DV8's 20\" Elite Series Light Bar Below Bull Bar \n\n\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coated Finish\u003c\/li\u003e\n\u003cli\u003e3mm \u0026amp; 5mm Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698353333,"sku":"FBJL-13","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/Jeep-Wrangler-_-Gladiator-OE-Plus-Front-Bumper-1.jpg?v=1793217321"},{"product_id":"dv8-tcjk-13","title":"DV8 2007-2018 Wrangler JK – Tire Carrier for MTO Bumper – TCJK-13","description":"\u003cp\u003eOur Wrangler JK Bumper Mounted Spare Tire Carrier was designed exclusively for use with our RBJK-13 Wrangler JK MTO Rear Bumper. The carrier swings out with the tailgate to provide ample access to the cargo area. A dual taper bearing and dual heim hinge pivot provides for easy and smooth operation of the carrier. By moving your spare tire off of the tailgate you protect it from flexing and movement when driving off-road. \u003c\/p\u003e\n\u003cp\u003eThe carrier fits up to a 38x13.50-inch tire, and up to 20-inch wheels (no wider than 9.5-inches). Incorporated in the design is a built in hi-lift jack mount to fit securely between the tire and the tailgate. Finished in a micro-texture black powder coat, it also features a paintable aluminum logo plate that can be color matched to your vehicle. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Disclaimer:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nMounts Only to DV8 Offroad’s Jeep JK MTO Rear Bumper \n\u003c\/li\u003e\n\u003cli\u003e\nAnything Larger than a 20” Wheel Will Not Work \n\u003c\/li\u003e\n\u003cli\u003e\nRecommended for 4+” Backspacing (-44 Offset Won’t Work) \n\u003c\/li\u003e\n\u003cli\u003e\nNot Compatible with Wheels Wider than 9.5” \n\u003c\/li\u003e\n\u003cli\u003e\nWill Fit Most 38x13.50 Tires \n\u003c\/li\u003e\n\u003cli\u003e\nDoes not Support Use of Factory 3rd Brake Light \n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nFits up to a 38x13.50 Tire \n\u003c\/li\u003e\n\u003cli\u003e\nDual Taper Bearing \u0026amp; Dual Heim Hinge Pivot for Smooth Operation \n\u003c\/li\u003e\n\u003cli\u003e\nMoves Weight Burden off the Aluminum Tailgate \n\u003c\/li\u003e\n\u003cli\u003e\nBuilt-In Hi-Lift Jack Mount \n\u003c\/li\u003e\n\u003cli\u003e\nMicro-Texture Black Powder Coat Finish \n\u003c\/li\u003e\n\u003cli\u003e\nPaintable Aluminum Logo Panel \n\u003c\/li\u003e\n\u003cli\u003e\nBolt-On Installation \n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698386101,"sku":"TCJK-13","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2018-Wrangler-JK-Tire-Carrier-for-MTO-Bumper-3.jpg?v=1793217322"},{"product_id":"dv8-rbjk-13","title":"DV8 2007-2018 Jeep Wrangler JK – MTO Series Rear Bumper – RBJK-13","description":"\u003cp\u003eOur Made to Overland Wrangler JK Rear Bumper was designed for both the rock crawler and the overlander. This full-width Jeep bumper fits up to a 37-inch spare tire with a max of 4.5-inches of backspacing on the factory carrier. Alternatively, the optional MTO Tire Carrier swing gate provides additional utility for your spare tire management by being able to swing free of the tailgate. \u003c\/p\u003e\n\u003cp\u003eRear lighting options include (2) mounts for 3-inch light pods that are set behind perforated aluminum accent panels. These raw aluminum panels are prepped to be painted, and could be paint matched to the body or other accessories. 1-inch thick D-ring mounts that take ⅞-inch shackle pins provide recovery options at the rear of your rig. Finished in a micro-texture black powder coat, this bumper features a fully bolt-on installation.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Full-Width Rear Bumper\u003c\/li\u003e\n\u003cli\u003eMounts for (2) 3” Light Pods\u003c\/li\u003e\n\u003cli\u003e1” Thick D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003eOptional Tire Carrier Add-On (TCJK-13)\u003c\/li\u003e\n\u003cli\u003eCompatible with Factory Hitch\u003c\/li\u003e\n\u003cli\u003eFits up to 37” Spare Tire (Max 4.5” Backspacing Wheels)\u003c\/li\u003e\n\u003cli\u003eWelded Zip-Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003ePaintable Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698418869,"sku":"RBJK-13","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2018-Jeep-Wrangler-JK-MTO-Series-Rear-Bumper-Offtruck-02.jpg?v=1793217322"},{"product_id":"dv8-rbjk-12","title":"DV8 2007-2018 Jeep Wrangler JK – FS-7 Series Rear Bumper – RBJK-12","description":"\u003cp\u003eDV8’s FS-7 Series Wrangler JK Rear Bumper features a mid-width design that can accommodate up to a 37-inch spare tire on the factory mount. Supplemental rear lighting options are provided by (2) mounts that sit behind aluminum accent panels for 3-inch light pods. Welded zip-tie tabs allow for clean wire management. Recovery options are provided by 1-inch thick D-ring mounts that take ⅞-inch shackle pins. The FS-7 is compatible with the factory hitch and license plate bracket. \u003c\/p\u003e\n\u003cp\u003eThis Jeep JK bumper was designed for heavy trail use, utility, and clearance. Finished in a micro-texture black powder coat, its style compliments factory body lines.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Mid-Width Rear Bumper\u003c\/li\u003e\n\u003cli\u003eMounts for (2) 3” Light Pods\u003c\/li\u003e\n\u003cli\u003e1” Thick D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003eCompatible with Factory Hitch\u003c\/li\u003e\n\u003cli\u003eFits up to 37” Spare Tire (Max 4.5” Backspacing Wheels)\u003c\/li\u003e\n\u003cli\u003eWelded Zip-Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003ePaintable Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698451637,"sku":"RBJK-12","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2018-Jeep-Wrangler-JK-FS-7-Series-Rear-Bumper-Offtruck-02.jpg?v=1793217323"},{"product_id":"dv8-rbgl-12","title":"DV8 2020-2026 Jeep Gladiator JT – MTO Series Rear Bumper – RBGL-12","description":"\u003cp\u003eOur MTO Series Gladiator Rear Bumper maximizes ground clearance and departure angles, making it an ideal solution for aggressive rock crawling. This bumper extends only 2.5-inches from the rear of the Gladiator (not including d-ring mounts). Its slim profile was designed to minimize the risk of dragging the rear end over obstacles on the trail. \u003c\/p\u003e\n\u003cp\u003eWe’ve included various features that any rock crawler could use. Since removal of the factory hitch is required, which also increases ground clearance; we offer a replacement accessory hitch that sits within the bumper behind the license plate. An included flip-up license plate mount allows access to the hitch when needed. The factory license plate lights are utilized with this plate mount. The MTO accepts (2) 3-inch light pods to provide additional rear lighting on dark or dusty trails. 1-inch thick mounts that take ¾-inch D-ring shackles provide recovery options. \u003c\/p\u003e\n\u003cp\u003eAdditional features include a high clearance trailer wiring mount for equipped models. The OEM backup sensors retain full functionality due to strategically placed sensor cutouts. A micro-texture black powder coat protects the bumper from the elements, and paintable aluminum mesh accent panels can be color matched to your rig. No drilling is required, as this features a fully bolt-on installation. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e* Please Note:\u003c\/em\u003e\u003c\/strong\u003e This is not compatible with the factory hitch. We offer a Replacement Accessory Hitch that integrates into the bumper’s design to maximize ground clearance. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e** Please Note:\u003c\/em\u003e\u003c\/strong\u003e This is not compatible with the factory spare tire carrier. We offer a Stand Up Spare Tire Carrier that works as an excellent alternative. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nUltra High Clearance Design for Aggressive Rock Crawling \n\u003c\/li\u003e\n\u003cli\u003e\nBumper Extends Only 2.5” From Rear of the Truck (Not Including D-Ring Mounts) \n\u003c\/li\u003e\n\u003cli\u003e\nMounts for (2) 3” Light Pods \n\u003c\/li\u003e\n\u003cli\u003e\nWelded Zip Tie Tabs for Clean Wire Management \n\u003c\/li\u003e\n\u003cli\u003e\n1” Thick Mounts for ¾” D-Rings (⅞” Shackle Pins) \n\u003c\/li\u003e\n\u003cli\u003e\nLicense Plate Flip-Up Kit Included to Access Accessory Hitch (Sold Separately) \n\u003c\/li\u003e\n\u003cli\u003e\nUtilizes Factory License Plate Lights \n\u003c\/li\u003e\n\u003cli\u003e\nHigh Clearance Trailer Wiring Mount \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with Factory Back-Up Sensors \n\u003c\/li\u003e\n\u003cli\u003e\nMicro-Texture Black Powder Coat \n\u003c\/li\u003e\n\u003cli\u003e\nPaintable Aluminum Accent Panels \n\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698484405,"sku":"RBGL-12","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2020-2023-Jeep-Gladiator-JT-MTO-Series-Rear-Bumper_Offtruck-10.jpg?v=1793217324"},{"product_id":"dv8-tcjl-13","title":"DV8 2018-2026 Jeep Wrangler JL – MTO Series Bumper Spare Tire Swing Gate – TCJL-13","description":"\u003cp\u003eOur MTO Series Wrangler JL Spare Tire Swing Gate was designed to support larger \u0026amp; heavier aftermarket wheels \u0026amp; tires. This add-on tire carrier is compatible with our MTO Series Steel Wrangler Rear Bumper. The swing gate opens with the tailgate, and transfers the extra tire\/wheel weight off of the aluminum tailgate and redirects it to the bumper. A dual taper bearing and dual heim pivot provide smooth opening \u0026amp; closing of the carrier.\u003c\/p\u003e\n\u003cp\u003eThe MTO Series Jeep spare tire carrier features an adjustable camera mount that enables you to relocate and align the factory rear camera. The third brake light is also accommodated in the design of the carrier, and retains full functionality. Additionally, the carrier features a mounting point for use with a Hi-Lift style jack or similar accessories. Installation is a bolt-on process, with no drilling required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e* Fitment Note: \u003c\/em\u003e\u003c\/strong\u003eThe carrier can fit up to a 20-inch wheel and a 38”x13.5” tire. We recommend use with wheels of 4+ inch backspacing, as this is not compatible with -44 offset wheels. This is not compatible with wheels wider than 9.5-inches. Will work with factory wheels with 2\" or larger wheel spacer. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003c\/em\u003eNot compatible with Mopar On-Board Air Compressor option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nMoves Wheel\/Tire Weight off the Aluminum Tailgate to our Reinforced Steel MTO Bumper \n\u003c\/li\u003e\n\u003cli\u003e\nSingle Action Swing Gate Opens Along with the Tailgate \n\u003c\/li\u003e\n\u003cli\u003e\nDual Taper Bearing and Dual Heim Pivot for Easy \u0026amp; Smooth Opening \u0026amp; Closing \n\u003c\/li\u003e\n\u003cli\u003e\nFits up to a 38”x13.50” Tire \n\u003c\/li\u003e\n\u003cli\u003e\nFits up to a 20” Wheel \n\u003c\/li\u003e\n\u003cli\u003e\nRecommended for 4+” Backspacing (Not Compatible with -44 Offset Wheels) \n\u003c\/li\u003e\n\u003cli\u003e\nNot Compatible with Wheels Wider than 9.5” \n\u003c\/li\u003e\n\u003cli\u003e\nAdjustable Camera Mount for Perfecting Fitment \n\u003c\/li\u003e\n\u003cli\u003e\nBuilt-In Hi-Lift Style Jack Mount \n\u003c\/li\u003e\n\u003cli\u003e\nAccepts Factory Third Brake Light \n\u003c\/li\u003e\n\u003cli\u003e\nRemovable Aluminum Logo Plate that can be Color Matched to Your Build \n\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698517173,"sku":"TCJL-13","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/Jeep-JL-Bumper-Mounted-Tire-Carrier_Offtruck-03.jpg?v=1793217324"},{"product_id":"dv8-rbjl-12","title":"DV8 2018-2026 Jeep Wrangler JL – FS-7 Series Rear Bumper – RBJL-12","description":"\u003cp\u003eOur FS-7 Series Jeep JL Rear Bumper features a sleek, mid-width design. The FS-7 can fit up to a 37-inch spare tire above the bumper using the factory carrier. The bumper includes a license plate bracket with a license plate light to relocate the plate over to the side away from your spare tire. A pair of 1-inch thick reinforced mounts for D-ring shackles provide recovery options. Rear lighting options include (2) 3-inch pod light mounts that sit in a shielded position behind perforated aluminum accent panels. Welded zip tie tabs are strategically located for clean wire management. \u003c\/p\u003e\n\u003cp\u003eThis Jeep rear bumper is compatible with the factory hitch \u0026amp; harness, and has sensor cutouts to retain full functionality of the parking sensors. If your Wrangler does not have the rear sensors, we include plugs to cover the mounting points. Finished in a micro-texture black powder coat, this bumper is fully bolt-on. \u003c\/p\u003e\n\u003cp\u003eThis rear bumper pairs great with any of our Wrangler JL Front Bumpers. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: \u003c\/strong\u003e**Will not work with OEM wheel due to wheel offset\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nSleek Mid-Width Design \n\u003c\/li\u003e\n\u003cli\u003e\nFits up to 37” Spare Tire Above Bumper Using Factory Carrier \n\u003c\/li\u003e\n\u003cli\u003e\nIncludes License Plate Relocation Bracket and License Plate Light \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with Factory Hitch \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with Rear Bumper Sensors (DV8 Sensor Bezels Recommended) \n\u003c\/li\u003e\n\u003cli\u003e1” Thick Mounts for ¾” D-Rings with ⅞” Shackles\u003c\/li\u003e\n\u003cli\u003e(2) 3” Light Pod Mounts Behind Perforated Aluminum Accent Panels \n\u003c\/li\u003e\n\u003cli\u003e\nWelded Zip Tie Tabs for Clean Wire Management \n\u003c\/li\u003e\n\u003cli\u003e\nMicro-Texture Black Powder Coat \n\u003c\/li\u003e\n\u003cli\u003e\nBolt-On Installation \n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698549941,"sku":"RBJL-12","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2018-2023-Jeep-Wrangler-JL-FS-7-Series-Rear-Bumper_Offtruck-09.jpg?v=1793217325"},{"product_id":"dv8-rbjl-11","title":"DV8 2018-2026 Jeep Wrangler JL – FS-15 Series Rear Bumper – RBJL-11","description":"\u003cp\u003eOur FS-15 Series Wrangler JL Rear Bumper features an extreme, low profile design suited for aggressive rock crawling. The bumper includes a license plate relocation bracket with a license plate light to make room for up to 37-inch spare tires above the bumper. The factory hitch and harness fit perfectly in an accessible position beneath the FS-15. For models equipped with factory sensors, we included sensor cutouts to retain full functionality of the feature. For models without factory sensors, we include sensor hole plugs for a clean look. \u003c\/p\u003e\n\u003cp\u003eToward each side of this rugged, Jeep bumper are 1-inch thick mounts that take ¾-inch D-Rings with ⅞-inch shackle pins. These can be used as anchor points for recovery situations if you or your trail buddy get stuck on an obstacle. The inside of the bumper includes welded zip-tie tabs for clean wire management of the license plate light or other optional accessories. Finished in a micro-texture black powder coat, this bumper features a fully bolt-on installation. \u003c\/p\u003e\n\n\u003cstrong\u003e*Please Note:\u003c\/strong\u003e Not recommended for those with a factory spare wheel with no aftermarket carrier. A minimum 4.5” backspacing is recommended. Aftermarket carrier\/tire mount riser required if running tire size larger than equipped from factory.\n\u003cstrong\u003e\u003c\/strong\u003e\n\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e \n\n\n\u003cul\u003e\n\u003cli\u003e\nHigh Clearance Design For Aggressive Rock Crawling \n\u003c\/li\u003e\n\u003cli\u003e\nRetains Factory Rear Bumper Sensors (Recommend Using our Sensor Bezels) \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with Factory Hitch \n\u003c\/li\u003e\n\u003cli\u003e\nLicense Plate Relocation Bracket with Plate Light \n\u003c\/li\u003e\n\u003cli\u003e\n1” Thick Mounts for D-Ring with ⅞” Shackle Pins (Not Included) \n\u003c\/li\u003e\n\u003cli\u003e\nWelded-in Zip Tie Tabs For Clean Wire Management \n\u003c\/li\u003e\n\u003cli\u003e\nMicro-Texture Black Powder Coat \n\u003c\/li\u003e\n\u003cli\u003e\nDirect Fit Bolt-On Installation \n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698582709,"sku":"RBJL-11","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2018-2023-Jeep-Wrangler-JL-FS-15-Series-Rear-Bumper_Offtruck-01.jpg?v=1793217326"},{"product_id":"dv8-rbjl-13","title":"DV8 2018-2026 Jeep Wrangler JL – MTO Series Rear Bumper – RBJL-13","description":"\u003cp\u003eThis Made To Overland Series Jeep Wrangler Rear Bumper was designed for heavy off-road use, and is compatible with our Jeep JL Bumper Mounted MTO Tire Carrier. The bumper features a full-width design with tapered wings that look great with both factory \u0026amp; aftermarket fender flares. The OEM spare tire mount can fit up to a 37-inch spare tire above the bumper center step. The MTO retains use of the factory hitch \u0026amp; harness, and features sensor cutouts to retain full functionality of parking sensors. \u003c\/p\u003e\n\u003cp\u003eTwo 3-inch light pods can be mounted behind the perforated aluminum accent panels for supplemental rear lighting. These could be wired to a separate switch or to your reverse lights. The bumper also has (2) 1-inch thick clevis mounts compatible with ¾-inch D-ring shackles to provide recovery options. A license plate bracket with an included light relocates your license plate away from the spare tire area to keep it visible when running a spare. On the interior of the bumper are welded zip-tie tabs for clean wire management. Our MTO Jeep Bumper has a fully bolt-on installation with no modifications required. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nFull Width Design Matching Factory \u0026amp; Aftermarket Fenders \n\u003c\/li\u003e\n\u003cli\u003e\nCompatible with our Jeep JL Bumper Mounted MTO Tire Carrier (TCJL-13) \n\u003c\/li\u003e\n\u003cli\u003eCompatible with Factory Hitch \u0026amp; Harness \n\u003c\/li\u003e\n\u003cli\u003e\nMounts for (2) 3” Light Pods Behind Perforated Aluminum Panels \n\u003c\/li\u003e\n\u003cli\u003e\n1” Thick Mounts for ¾” D-Rings (⅞” Shackle Pins) \n\u003c\/li\u003e\n\u003cli\u003e\nRetains Full Functionality of Parking Sensors (If Equipped) \n\u003c\/li\u003e\n\u003cli\u003e\nOEM Mount Can Fit up to a 37” Spare Tire \n\u003c\/li\u003e\n\u003cli\u003eIncludes License Plate Relocation Bracket and License Plate Light\u003c\/li\u003e\n\u003cli\u003eMinor Wiring Required for License Plate Light\u003c\/li\u003e\n\u003cli\u003e\nWelded-in Zip Tie Tabs for Clean Wire Management \n\u003c\/li\u003e\n\u003cli\u003e\nMicro-Texture Black Powder Coat Finish \n\u003c\/li\u003e\n\u003cli\u003e\nBolt-On Installation \n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698615477,"sku":"RBJL-13","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2018-2023-Jeep-Wrangler-JL-MTO-Series-Rear-Bumper-w-Optional-Tire-Carrier_Offtruck-11.jpg?v=1793217327"},{"product_id":"dv8-rbgl-11","title":"DV8 2020-2026 Jeep Gladiator JT – FS-15 Series Rear Bumper – RBGL-11","description":"\u003cp\u003eOur FS-15 Series Gladiator Rear Bumper was designed for off-road capability and aggressive rock crawling. The bumper has an extreme low-profile for maximum clearance and departure angles. It retains OEM features such as the factory hitch, trailer harness \u0026amp; connector, and license plate lights. It also has carefully located cutouts for the factory parking sensors, which we recommend installing with our Mopar Sensor Bezels. Welding zip tie tabs behind the bumper provide options for clean wire management.\u003c\/p\u003e\n\u003cp\u003eThe FS-15 Series Jeep JT Rear Bumper provides recovery options with 1-inch thick mounts for ¾-inch D-ring shackles with ⅞-inch pins. Finished in a micro-texture black powder coat, this Gladiator bumper not only looks great, but is protected against the elements. Installation is a straightforward bolt-on process requiring 2 people.\u003c\/p\u003e\n\u003cp\u003eMix and match any DV8 front \u0026amp; rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance Design for Aggressive Rock Crawling\u003c\/li\u003e\n\u003cli\u003e1” Thick Mounts for ¾” D-Ring Shackles with ⅞” Pins\u003c\/li\u003e\n\u003cli\u003eCompatible with Factory Hitch\u003c\/li\u003e\n\u003cli\u003eMount for OEM Trailer Wiring Harness \u0026amp; Connector\u003c\/li\u003e\n\u003cli\u003eRetains Parking Sensors\u003c\/li\u003e\n\u003cli\u003eRetains OEM License Plate Lights\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip Tie Tabs for Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698648245,"sku":"RBGL-11","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2020-2023-Jeep-Gladiator-JT-FS-15-Series-Rear-Bumper_Offtruck-05.jpg?v=1793217327"},{"product_id":"dv8-fbjl-05","title":"DV8 2007-2026 Jeep Wrangler JK\/JL \u0026 Gladiator JT – FS-15 Series Front Bumper – FBJL-05","description":"\u003cp\u003eWe took our iconic FS-15 Jeep Front Bumper and introduced several improvements. We drastically reduced overall weight while maintaining the same standards in strength and protection. The overall fit and finish was improved, and JL\/JT models no longer require a bumper adapter.\u003c\/p\u003e\n\u003cp\u003eThis stubby Jeep front bumper was designed for performance and protection while on the trail. Its high clearance design is suited for anything from easy to the most advanced OHV trails. The winch mount can fit multiple winch sizes, including most 12,000lb winches. Couple this with dual 1-inch thick D-ring mounts for ¾-inch shackles, and you have ample options for just about any recovery situation. The heavy duty bull bar protects both the winch and grille from light debris such as brush or small branches. The FS-15 works great in conjunction with our SPJL-02 Sway Bar Disconnect Skid Plate to provide solid front end protection when crawling over rocky obstacles. \u003c\/p\u003e\n\u003cp\u003eThis bumper features mounting points for factory 4-bolt style 4-inch fog lights, enabling you to retain the OEM feature. The bull bar is capable of mounting either dual light pods or our 13-inch Elite Series Light Bar. Installation on JL\/JT models is a strictly bolt-on process, but please note that JK models require trimming or removal of the plastic trim cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStubby Jeep Front Bumper\u003c\/li\u003e\n\u003cli\u003e\nWorks Great with our Sway Bar Skid Plate\n\u003c\/li\u003e\n\u003cli\u003eFits Multiple Size Winches and Most 12k lb Winches\u003c\/li\u003e\n\u003cli\u003e1” Thick D-Ring Mounts that Accept ¾” Shackles (⅞” Pin)\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Bull Bar to Protect the Winch\/Grille from Light Debris\u003c\/li\u003e\n\u003cli\u003eHigh Clearance Design for Ultimate Approach Angles\u003c\/li\u003e\n\u003cli\u003eAn Updated Design of our Iconic DV8 FS-15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLighting Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Factory 4-Bolt Style 4” Fog Lights\u003c\/li\u003e\n\u003cli\u003e(2) 3” Light Pods \u003cstrong\u003eOR \u003c\/strong\u003e(1) 13” Elite Series Light Bar (Requires our Elite Series Large Light Bar Mounts)\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698681013,"sku":"FBJL-05","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2023-Jeep-Wrangler-JK-JL-_-Gladiator-JT-FS-15-Series-Front-Bumper_Offtruck-04.jpg?v=1793217327"},{"product_id":"dv8-fbjl-12","title":"DV8 2007-2026 Jeep Wrangler JK\/JL \u0026 Gladiator JT – MTO Series Front Bumper – FBJL-12","description":"\u003cp\u003eOur MTO Series Wrangler \u0026amp; Gladiator Winch Front Bumper features a full-width design for maximum protection on the trail. Its aggressive design and flared wings look great with the JK factory fenders and the JL\/JT Rubicon and Non-Rubicon fenders. The recessed winch tray accepts multiple size winches, and sits protected behind a tubular bull bar. Additional recovery options are provided by the 1-inch D-ring mounts that take ¾-inch shackle pins. Sitting behind paintable aluminum accent panels is a mount that can take a DV8 Elite 20” single row light bar, Baja Designs S8 20”, or Rigid SR 20” LED light bars. On each wing of the bumper is a mount for a 3-inch light pod. The bumper is finished in a micro-texture black powder coat, and features a fully bolt-on installation. The MTO Series front bumper is the perfect balance of durability, style, and utility.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e* Please Note: \u003c\/strong\u003e\u003c\/em\u003eThis bumper is not compatible with roller fairleads. We recommend an iron\/steel hawse style fairlead if running a steel cable winch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Width Design for Maximum Protection\u003c\/li\u003e\n\u003cli\u003eAccepts Multiple Size Winches\u003c\/li\u003e\n\u003cli\u003ePaintable Aluminum Accent Panels\u003c\/li\u003e\n\u003cli\u003eDesigned to Work Well with all JK\/JL\/JT Factory Fenders\u003c\/li\u003e\n\u003cli\u003e20” Single Row Light Bar Options\u003c\/li\u003e\n\u003cli\u003eMounts for (2) 3” Pod Lights \u003c\/li\u003e\n\u003cli\u003e1” D-Ring Mounts for ¾” Shackle Pins\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\nWorks Flawlessly with our SPJL-02 Skid Plate\n\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698713781,"sku":"FBJL-12","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2023-Jeep-Wrangler-JK-JL-Gladiator-JT-MTO-Series-Front-Bumper_Offtruck-02.jpg?v=1793217333"},{"product_id":"dv8-fbjl-11","title":"DV8 2007-2026 Jeep Wrangler JK\/JL \u0026 Gladiator JT – FS-1 Series Stubby Front Bumper – FBJL-11","description":"\u003cp\u003eEngineered for the Wrangler JK \u0026amp; JL, as well as the Gladiator JT, this stubby Jeep winch bumper boasts a combination of off-road functionality and striking aesthetics. It was designed to maintain optimal clearance, to enable you to navigate the most challenging terrains. Equipped with a recessed winch tray tucked behind a tubular bull bar, many different size winches can be mounted for recovery options. 1-inch thick D-ring mounts that take ¾-inch shackle pins provide additional recovery options.\u003c\/p\u003e\n\u003cp\u003eEngineered to accommodate DV8 Elite 20” Dual Row, Baja Designs 20” Single Row, or Rigid 20” Single Row light bars, the inset light mount offers you lighting options on the trail. Your Jeep's OEM sensors are integrated in our bumper design, and retain their functionality. The bumper and protective bull bar are finished in a micro-texture black powder coat. The FS-1 Series bumper features a fully bolt-on installation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e* Please Note: \u003c\/strong\u003e\u003c\/em\u003eThis bumper is not compatible with roller fairleads. We recommend an iron\/steel hawse style fairlead if running a steel cable winch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance Stubby Winch Bumper\u003c\/li\u003e\n\u003cli\u003eTubular Bull Bar\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensors\u003c\/li\u003e\n\u003cli\u003eAccepts Multiple Size Winches\u003c\/li\u003e\n\u003cli\u003e20” Dual Row Light Bar Mount\u003c\/li\u003e\n\u003cli\u003e1” Thick D-Ring Mounts for ¾” Pin Shackles\u003c\/li\u003e\n\u003cli\u003eRecessed winch Tray and Removable Fairlead Mount\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLight Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20” light bar mount will only work with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBaja Designs 20”\u003c\/li\u003e\n\u003cli\u003eRigid 20”\u003c\/li\u003e\n\u003cli\u003eDV8 Elite 20” Dual Row\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698910389,"sku":"FBJL-11","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2023-Jeep-Wrangler-JK-JL-Gladiator-JT-FS-1-Series-Stubby-Front-Bumper_Offtruck-02.jpg?v=1793217334"},{"product_id":"dv8-rbgl-06","title":"DV8 2020-2026 Jeep Gladiator JT – FS-7 Series Rear Bumper – RBGL-06","description":"\u003cp\u003eThe FS-7 Series Jeep Gladiator Rear Bumper brings your rig both rugged durability and clean functionality. Engineered to tackle the toughest terrains, this rear bumper boasts a high clearance design, ensuring your departure angle isn’t compromised. This bumper's well-designed step offers easy cargo access to your truck bed for loading and unloading your gear. It effortlessly accommodates your factory hitch, license plate light, and trailer harness connector, ensuring that you maintain full functionality without any modifications.\u003c\/p\u003e\n\u003cp\u003eEquipped with two mounts for 3-inch light pods, this rear bumper gives you the flexibility to enhance your rear lighting with ease. Illuminate the trails behind you and stay confident, even during low-light off-road excursions. Welded-in zip tie tabs offer practical solutions to keep your wires organized and neat. Crafted to withstand the elements, this rear bumper is finished with a micro-texture black powder coat. Not only does it provide a sleek and stylish look, but it also protects the bumper from rust, scratches, and wear. The FS-7 Series is fully bolt-on, with no modifications necessary for install.\u003c\/p\u003e\n\u003cp\u003eMix and match any DV8 front \u0026amp; rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance Design with Functional Step\u003c\/li\u003e\n\u003cli\u003eCompatible with Factory Hitch\u003c\/li\u003e\n\u003cli\u003eD-Ring Mounts for D-Rings with ¾” Shackle Pins\u003c\/li\u003e\n\u003cli\u003eAluminum Accent Panels (Paintable)\u003c\/li\u003e\n\u003cli\u003eZip Tie Tabs for Wire Management\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM Plate Lights \u0026amp; Trailer Harness Connector\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eFully Bolt-On\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698975925,"sku":"RBGL-06","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2020-2023-Jeep-Gladiator-JT-MTO-Series-Rear-Bumper_Offtruck-2.jpg?v=1793217336"},{"product_id":"dv8-fbjl-07","title":"DV8 2007-2026 Jeep Wrangler JK\/JL \u0026 Gladiator JT – FS-7 Mid-Width Winch Front Bumper – FBJL-07","description":"\u003cp\u003eDesigned with rock crawling in mind, our Gladiator JT \u0026amp; Wrangler JK\/JL Mid-Width Winch Front Bumper boasts a high clearance design. Engineered to perfection and inspired by the classic DV8 FS-7 bumper, this rugged bumper is designed to take your adventure to the next level. Bumper features a recessed winch tray, ensuring your winch stays at a lower profile position. Not only does it provide a sleek and streamlined appearance, but it also accommodates a wide range of winch sizes, making it versatile and adaptable to your needs. \u003c\/p\u003e\n\u003cp\u003eA bull bar located in front of the winch adds an extra layer of protection to your vehicle, safeguarding it from potential obstacles and impacts. Equipped with D-ring mounts that accept ¾” shackles, the FS-7 ensures you have reliable recovery options whenever the situation demands it.\u003c\/p\u003e\n\u003cp\u003eAt the center of the bumper is a light mount Compatible with the following lights:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDV8 Elite Series 20” dual row\u003c\/li\u003e\n\u003cli\u003eBaja Designs 20” single row\u003c\/li\u003e\n\u003cli\u003eRigid 20” single row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdditionally, each wing can take a 3-inch pod light to round out your supplemental lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e* Please Note: \u003c\/strong\u003e\u003c\/em\u003eThis bumper is not compatible with roller fairleads. We recommend an iron\/steel hawse style fairlead if running a steel cable winch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMid-Width Design\u003c\/li\u003e\n\u003cli\u003eHigh Clearance\u003c\/li\u003e\n\u003cli\u003eBull Bar\u003c\/li\u003e\n\u003cli\u003eGreat for Use with Aftermarket Fenders\u003c\/li\u003e\n\u003cli\u003e20” Light Bar Mount\u003c\/li\u003e\n\u003cli\u003eAccepts Multiple Size Winches\u003c\/li\u003e\n\u003cli\u003eRecessed Winch Tray\u003c\/li\u003e\n\u003cli\u003eD-Ring Mounts for ¾” Shackle Pins\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625698943157,"sku":"FBJL-07","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2023-Jeep-JK-JL-_-JT-FS-7-Mid-Width-Winch-Front-Bumper_Offtruck-5.jpg?v=1793217335"},{"product_id":"dv8-fbjl-06","title":"DV8 2007-2026 Jeep Wrangler \u0026 Gladiator – FS-25 Stubby Front Bumper – FBJL-06","description":"\u003cp\u003eOur revamped FS-25 Stubby Jeep Front Bumper is now better than ever with enhanced features and a sleek design. We've listened to our customers and made significant improvements to make this bumper a top choice for Jeep Wrangler JK, Wrangler JL, and Gladiator JT owners. One of the standout upgrades is the improved micro-texture powder coating, providing superior durability and resistance to wear and tear. The bumper's reduced weight ensures optimal performance without compromising strength, making it an ideal choice for off-road driving.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit seamlessly on the Wrangler JK\/JL and Gladiator JT without the need for a bumper adapter, the FS-25 Stubby Jeep Front Bumper offers a hassle-free installation experience. No modifications required—simply bolt it on and hit the trails. The FS-25 comes equipped with a removable plated bull bar, allowing for versatile customization options. With its innovative design, you can effortlessly mount the DV8 Elite 20” Single Row Light Bar, the Rigid SR 20” Light Bar, or the Baja Designs S8 20” Light Bar, enhancing your visibility and adding a stylish touch to your Jeep.\u003c\/p\u003e\n\u003cp\u003eRock crawlers will appreciate the high clearance design of this bumper, ensuring maximum maneuverability on challenging terrain. Not only does it provide exceptional ground clearance, but it also offers a range of recovery options. The bumper is compatible with most winch sizes, and the winch plate is removable if you prefer not to run a winch, giving you the freedom to customize your setup. Additionally, the FS-25 Stubby Jeep Front Bumper features clevis mounts capable of accepting ¾” D-ring Shackles, such as our Elite Series D-Rings, enabling you to tackle recovery tasks with confidence.\u003c\/p\u003e\n\u003cp\u003eIncluded fog light mounts are suitable for OEM 4-bolt 4-inch fog lights, as well as our aftermarket fog lights. We've also taken care of wire management with the inclusion of zip tie tabs, allowing you to keep your wiring organized and secure. No more messy and tangled wires—enjoy a clean and professional-looking setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStubby High Clearance Jeep Bumper\u003c\/li\u003e\n\u003cli\u003ePlated Bolt-On Bull Bar\u003c\/li\u003e\n\u003cli\u003eMount for Single Row 20” Light Bar\u003c\/li\u003e\n\u003cli\u003eFog Light Mounts\u003c\/li\u003e\n\u003cli\u003eWinch Mount Compatible With Multiple Sizes\u003c\/li\u003e\n\u003cli\u003eD-Ring Mounts\u003c\/li\u003e\n\u003cli\u003eDirect Fit Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625699041461,"sku":"FBJL-06","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/2007-2023-Jeep-Wrangler-Gladiator-FS-25-Stubby-Front-Bumper_Offtruck_2.jpg?v=1793217336"},{"product_id":"dv8-rbgl-09","title":"DV8 2020-2026 Jeep Gladiator JT Spec Series Rear Bumper – RBGL-09","description":"\u003cp\u003eDeveloped with extreme terrain in mind, the Spec Series Rear Bumper for the Jeep Gladiator is designed for maximum function and protection in a stylish package. Its high clearance design allows for aggressive rock crawling, ensuring your vehicle can take on whatever the trail throws its way. Featuring two 3-inch light pod mounts on either end of the bumper behind aluminum accent panels, as well as welded zip-tie tabs inside for clean wire management; this bumper ensures that you won't be left in the dark out on the trails. With two clevis mounts capable of running ¾-inch D-ring shackles, you'll have recovery options if needed. \u003c\/p\u003e\n\u003cp\u003eCrafted from steel finished in a rust resistant black powder coat and accented with satin black aluminum panels, this bumper was built to look just as good as it performs. Compatible with the factory hitch and featuring a high clearance trailer wiring mount, this Gladiator rear bumper has everything you need to ensure your experience on the trail is amazing.\u003c\/p\u003e\n\u003cp\u003eMix and match any DV8 front \u0026amp; rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n High Clearance Design For Aggressive Rock Crawling\n\u003c\/li\u003e\n\u003cli\u003e\n Welded-in Zip Tie Tabs For Clean Wire Management\n\u003c\/li\u003e\n\u003cli\u003e\n Accepts (2) up to 3\" Pod Lights\n\u003c\/li\u003e\n\u003cli\u003e\n Compatible With Factory Hitch\n\u003c\/li\u003e\n\u003cli\u003e\n Compatible With Factory Sensors\n\u003c\/li\u003e\n\u003cli\u003e\n Clevis Mounts for ¾” D-Ring Shackles\n\u003c\/li\u003e\n\u003cli\u003e\n Micro Texture Black Powder Coat\n\u003c\/li\u003e\n\u003cli\u003e\n Satin Black Aluminum Accent Panels\n\u003c\/li\u003e\n\u003cli\u003e\n High Clearance Trailer Wiring Mount\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625699074229,"sku":"RBGL-09","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/Jeep-Gladiator-JT-Spec-Series-Rear-Bumper-1.jpg?v=1793217337"},{"product_id":"dv8-fbjl-09","title":"DV8 2018-2026 Wrangler JL \u0026 Gladiator JT – Spec Series Front Bumper – FBJL-09","description":"\u003cp\u003eTransform your 2018 or newer Jeep Wrangler JL or Gladiator JT into a rugged and unstoppable off-road machine with the new Spec Series Winch Front Bumper from DV8 Offroad. Built for performance, protection, and one-of-a-kind style, this bumper offers a bold look that can’t be duplicated. Its high clearance design is perfect for aggressive rock crawling, and allows you to conquer any obstacle in the way. The removable winch plate perfectly aligns with most full size winches including up to a Warn 12s EVO (pictured in the gallery) so you can make quick work of any recovery job on the trail.\u003c\/p\u003e\n\u003cp\u003eThe bull bar protects against light brush and can mount up to a 15-inch light bar above or below the bar if not running a winch. A 20-inch light bar can be mounted behind the satin black mesh plate in the middle of the bumper. A pair of up to 4-inch round lights can be mounted on the top plate of the bumper for even more lighting options. Pictured in the gallery are amber Baja Designs LP4 round lights. Installation is a direct fit, bolt-on process that we detail in our step-by-step install guide. Equipped with everything you need to take your off-roading game to the next level and built with style in mind, upgrade today with the Spec Series Jeep Winch Front Bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e* Please Note: \u003c\/strong\u003e\u003c\/em\u003eThis bumper is not compatible with roller fairleads. We recommend an iron\/steel hawse style fairlead if running a steel cable winch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance Design For Aggressive Rock Crawling\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip Tie Tabs For Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eAccepts Multiple Size Winches\u003c\/li\u003e\n\u003cli\u003eIncluded Bull Bar For Protection Against Light Debris\/ Brush\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eSatin Black Mesh Accent Plate\u003c\/li\u003e\n\u003cli\u003eWorks Flawlessly with our SPJL-02 skid plate\n\u003c\/li\u003e\n\u003cli\u003eAccepts (1) 20\" Light Bar, (1) up to 15\" Light Bar, and (2) Round Lights (No bigger than LP4 or Rigid 360)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625699106997,"sku":"FBJL-09","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/jeep-gladiator-jeep-wrangler-jl-front-bumper-spec-series-offtruck.jpg?v=1793217338"},{"product_id":"dv8-wbpf-01","title":"DV8 Pocket Fairlead – For Synthetic Rope Winches – WBPF-01","description":"\u003cp\u003eWhen it comes to recovering your vehicle from a tough situation, you need reliability and durability that you can depend on. Look no further than the Pocket Fairlead from DV8 Offroad. CNC cut from high quality aerospace aluminum and coated with a black military grade hard anodized finish, this fairlead ensures optimal performance for all your recovery needs. It boasts a 20,000 lb working load limit and accommodates synthetic ropes up to 7\/16\" diameter with ease. Not only that, but it also features a laser-etched design as well as heavy duty hook and stainless steel pin. We recommend installing a soft shackle in conjunction with the hook for even greater security.\u003c\/p\u003e\n\u003cp\u003eWith all the features that this special fairlead has to offer, you'll have the confidence and peace of mind when dealing with any difficult recovery situations out there. Upgrade your existing winch setup today with the DV8 Offroad Pocket Fairlead for superior off-road performance!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** Fitment Note:\u003c\/strong\u003e Make sure you double-check the clearance of the base plate for bumper fitment - this fairlead measures 11.75” L x 3.5” H x 1.25” D.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20,000 lb Working Load Limit\u003c\/li\u003e\n\u003cli\u003eAerospace Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eBlack Military Grade Hard Anodized Finish\u003c\/li\u003e\n\u003cli\u003eLaser Engraved Etching\u003c\/li\u003e\n\u003cli\u003eFor Synthetic Rope Only\u003c\/li\u003e\n\u003cli\u003eIncluded Hook \u0026amp; Stainless Steel Pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eProtected by Patent Number US 10519012 B1\u003c\/em\u003e\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625699139765,"sku":"WBPF-01","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/dv8-offroad-pocket-fairlead-synthetic-rope-winch.jpg?v=1793217338"},{"product_id":"dv8-rbjl-09","title":"DV8 2018-2026 Wrangler JL – Spec Series Rear Bumper – RBJL-09","description":"\u003cp\u003eStep your off-road game up with the new Spec Series line of bumpers from DV8 Offroad. This Jeep JL Rear Bumper has everything you need for accessing tough terrain – with a stylish, dynamic look and top-of-the-line protection. Engineered for aggressive rock crawling, this high clearance rear bumper offers extreme protection from obstacles and other hazards off the beaten path. Its ultra-low profile means great ground clearance so you can navigate rocks, roots, and other rough terrains like nothing else. Got stuck? With two clevis mounts that take ¾” D-ring shackles, you have excellent recovery options to get you back on the trail. Towards either end of the bumper are mounting points for a 3-inch light pod for supplemental trail lighting.\u003c\/p\u003e\n\u003cp\u003eComplete with a direct fit bolt-on installation that retains the factory hitch \u0026amp; back up sensor functionality, the Spec Series Rear Bumper is an excellent choice when it comes to choosing the perfect bumper for your Jeep. Transform your off road experience with this upgrade today!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Please Note:\u003c\/strong\u003e Not recommended for those with a factory spare wheel with no aftermarket carrier. A minimum 4.5” backspacing is recommended. Aftermarket carrier\/tire mount riser required if running tire size larger than equipped from factory\u003c\/p\u003e\n\u003cp\u003eMix and match any DV8 front \u0026amp; rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Clearance Design For Aggressive Rock Crawling\u003c\/li\u003e\n\u003cli\u003eAccepts (2) 3\" Pod Lights For Supplemental Lighting\u003c\/li\u003e\n\u003cli\u003eClevis Mounts for ¾” D-Ring Shackles\u003c\/li\u003e\n\u003cli\u003eWelded-in Zip Tie Tabs For Clean Wire Management\u003c\/li\u003e\n\u003cli\u003eIncludes License Plate Relocation Bracket \u0026amp; Plate Light\u003c\/li\u003e\n\u003cli\u003eRetains Back-Up Sensor Functionality\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eSatin Black Accent Panel\u003c\/li\u003e\n\u003cli\u003eDirect Fit Bolt-On Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":53625699172533,"sku":"RBJL-09","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/jeep-wrangler-jl-spec-rear-bumper-offtruck.jpg?v=1793217338"}],"url":"https:\/\/spyderoffroad.com\/collections\/dv8-offroad.oembed","provider":"Spyder Off-Road and Performance","version":"1.0","type":"link"}