Jeep Wrangler JK 2-Door Base 3” Lift Kit (with 9550 VSS Shocks)
Engineered with drivability and performance in mind, the TeraFlex Jeep Wrangler JK Base 3” Lift Kit w/ 9550 VSS Shock Absorbers includes the basic pieces needed to lift your JK to tackle some serious trails. Not only do TeraFlex kits drive straight, but they will crawl over anything to get you there and back!
• Jeep Wrangler JK (2-door)
• LIFT HEIGHT: 3”
• MAX TIRE DIAMETER: 35”
• 3” lift coil springs
• Bump stops
• Front sway bar disconnects
• Rear track bar bracket
• Rear sway bar links
• TeraFlex 9550 VSS shocks – set of 4
• All necessary hardware
• And more
• Requires aftermarket wheels w/ 4.5” backspacing or less – or TeraFlex Offset Wheel Adapters (Part #1055000) for stock wheels.
• 2012-2018 JK/JKU models require TeraFlex Exhaust Spacers (Part #2610000) or other exhaust modification for proper driveshaft clearance.
• Driveshaft modifications are recommended with this suspension system. See the TeraFlex Rzeppa High Angle CV Kit (Part #1744014).
• 2007-2011 JK/JKU models will require TeraFlex Extended Length Front Brake Lines (Part #4353300).
• Requires TeraFlex 2.5-4” Adjustable Alpine Flexarms (Part #1415610) or 3-6” Adjustable Alpine Long Flexarms (Part #1315010) and HD Forged Adjustable Front Track Bar (Part #1753418) to set correct suspension geometry including caster angle, pinion angle, roll center, & load tuning during re-alignment after installation. Proper suspension geometry ensures all stability controls function within factory parameters.
INSTALL TIME: 5 Hours