{"product_id":"jl-2dr-teraflex-3-5-alpine-ct3-long-arm-suspension-system-no-shocks-1523100","title":"JL 2dr: TeraFlex 3.5\" Alpine CT3 Long Arm Suspension System – No Shocks – 1523100","description":"\u003cp\u003eJL 2dr: 3.5\" Alpine CT3 Long Arm Suspension System - No Shocks.\u003c\/p\u003e\u003cp\u003eTeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street \u0026amp; Trail) Suspension Systems.\u003c\/p\u003e\u003cp\u003eA 3.5\" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all\" attitude one of our 3.5\" Alpine CT3 Suspension Systems will make it happen. The Alpine CT3 Long Arm features our Alpine Long Control Arms \u0026amp; Brackets as well as a Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets for maximum tunability and flawless performance for years to come.\u003c\/p\u003e\u003cp\u003eAdjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position on vehicles with 3-6\" lifts. On higher lifts Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms.\u003c\/p\u003e\u003cp\u003eThe Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for improved handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).\u003c\/p\u003e\u003cp\u003eAlpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! A 3.5\" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all\" attitude, our 3.5\" Alpine CT3 Long Arm will make it happen. Features maximum tunability and performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment and Installation Notes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shocks and steering stabilizers sold separately.\u003c\/li\u003e\n\u003cli\u003eRequires aftermarket wheels with 4.75\" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.\u003c\/li\u003e\n\u003cli\u003eModels with plastic bumpers require removal of bumper-to-fender wind deflector\/splash guards to fit 35\" or larger tires.\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders Require 3\" Front And 2.5\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders require 2\" Front and 2\" Rear Bump Stop Extensions (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders require 2.5\" Front and 3\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37\" tires.\u003c\/li\u003e\n\u003cli\u003eAlignment required.\u003c\/li\u003e\n\u003cli\u003eRequires longer shocks (NOT INCLUDED)\u003c\/li\u003e\n\u003cli\u003eFalcon Performance Shocks recommended.\u003c\/li\u003e\n\u003c\/ul\u003e         \u003cli id=\"installation\"\u003e\u003cdiv id=\"installation\"\u003e \u003cbr\u003e \u003cdiv\u003e\n\u003cb\u003eDO IT YOURSELF:\u003c\/b\u003e Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. TeraFlex is NOT responsible for any damage or failure resulting from improper installation.\u003c\/div\u003e  \u003cdiv\u003e Estimated Labor Time: 27.5 Hours (28.5 Hours w\/ shocks)\u003cli\u003e Installation Effort: 27.5 Hours (28.5 Hours w\/ shocks)\u003c\/li\u003e\n\u003c\/div\u003e   \u003cdiv\u003e  \u003cdiv\u003e \u003cimg src=\"https:\/\/teraflex.com\/media\/amasty\/amfile\/icon\/Document.png\"\u003e \u003ca href=\"https:\/\/teraflex.com\/amfile\/file\/download\/file\/1619\/product\/4970\/\" target=\"_blank\"\u003e999308 Jeep JL Jounce Bumper Instructions\u003c\/a\u003e  \u003cspan\u003e(1.29 MB)\u003c\/span\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cimg src=\"https:\/\/teraflex.com\/media\/amasty\/amfile\/icon\/Document.png\"\u003e \u003ca href=\"https:\/\/teraflex.com\/amfile\/file\/download\/file\/1635\/product\/4970\/\" target=\"_blank\"\u003e999340 Jeep JL JT Forged Front Track Bar Assembly With Upgrade Joint Kit Instructions\u003c\/a\u003e  \u003cspan\u003e(1.43 MB)\u003c\/span\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cimg src=\"https:\/\/teraflex.com\/media\/amasty\/amfile\/icon\/Document.png\"\u003e \u003ca href=\"https:\/\/teraflex.com\/amfile\/file\/download\/file\/1649\/product\/4970\/\" target=\"_blank\"\u003e999360 Jeep JL Alpine Long Arm Body Mount Modification Template\u003c\/a\u003e  \u003cspan\u003e(4.69 MB)\u003c\/span\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cimg src=\"https:\/\/teraflex.com\/media\/amasty\/amfile\/icon\/Document.png\"\u003e \u003ca href=\"https:\/\/teraflex.com\/amfile\/file\/download\/file\/1807\/product\/4970\/\" target=\"_blank\"\u003e999324 Jeep JL 3.5in Spring Lift Instructions\u003c\/a\u003e  \u003cspan\u003e(1.43 MB)\u003c\/span\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cimg src=\"https:\/\/teraflex.com\/media\/amasty\/amfile\/icon\/Document.png\"\u003e \u003ca href=\"https:\/\/teraflex.com\/amfile\/file\/download\/file\/1808\/product\/4970\/\" target=\"_blank\"\u003e999335 Jeep JL Alpine Long Arm and Bracket Instructions\u003c\/a\u003e  \u003cspan\u003e(39.90 kB)\u003c\/span\u003e   \u003cdiv\u003e\n\u003ch3\u003eHave a certified mechanic do it for you!\u003c\/h3\u003e\n\u003cform\u003e\n\u003clabel\u003eLocation *\u003c\/label\u003e \u003cinput type=\"text\" placeholder=\"Enter a Location\" value=\"\"\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cinput type=\"radio\" id=\"pdp-search-location\" name=\"search-option\" value=\"search-location\" checked\u003e\u003clabel for=\"pdp-search-location\"\u003eLocation\u003c\/label\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cinput type=\"radio\" id=\"pdp-search-distributor\" name=\"search-option\" value=\"search-distributor\"\u003e\u003clabel for=\"pdp-search-distributor\"\u003eDistributor Name\u003c\/label\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cinput type=\"submit\" id=\"pdp-submit\" value=\"Search\"\u003e\n\u003c\/form\u003e     \u003cli id=\"fnb\"\u003e\u003cdiv id=\"fnb\"\u003e\n\u003cul\u003e\n\u003cli\u003eAlpine CT3:\u003c\/li\u003e\n\u003cli\u003eLift Height: 3.5\"\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders: 35\" Tires\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders: 35-37\" Tires\u003c\/li\u003e\n\u003cli\u003eCT Long Arm Suspension Systems:\u003c\/li\u003e\n\u003cli\u003eAdjustable Alpine Long Control Arms \u0026amp; Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6\" lift kits\u003c\/li\u003e\n\u003cli\u003eAlpine Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength\u003c\/li\u003e\n\u003cli\u003eOn higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms\u003c\/li\u003e\n\u003cli\u003eBolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits\u003c\/li\u003e\n\u003cli\u003eLong Arm Suspension Crossmember provides additional strength\u003c\/li\u003e\n\u003cli\u003eCross-Trail:\u003c\/li\u003e\n\u003cli\u003eDelivers true Cross-Trail (CT) performance\u003c\/li\u003e\n\u003cli\u003ePositive, responsive handling with reduced NVH\u003c\/li\u003e\n\u003cli\u003eHigh-quality, maintenance-free factory'style bushings provide excellent vibration damping and ride quality\u003c\/li\u003e\n\u003cli\u003eFront HD Forged Adjustable Track Bar and Front (3.5\"+) and Rear Track Bar Axle Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for improved handling\u003c\/li\u003e\n\u003cli\u003eFront and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement\u003c\/li\u003e\n\u003cli\u003eFeatures Front Sway Bar Quick Disconnects\u003c\/li\u003e\n\u003cli\u003eFull range of movement for off-road flex and articulation\u003c\/li\u003e\n\u003cli\u003eInstall and drive, simple bolt-on installation - no welding required\u003c\/li\u003e\n\u003cli\u003eTeraFlex Limited Lifetime Warranty against defects\u003c\/li\u003e\n\u003cli\u003eFitment: Fits:\u003c\/li\u003e\n\u003cli\u003eFitment: JL Wrangler (2-door)\u003c\/li\u003e\n\u003cli\u003eFitment: Specs:\u003c\/li\u003e\n\u003cli\u003eFitment: Lift Height: 3.5\"\u003c\/li\u003e\n\u003cli\u003eFitment: Max Tire Diameter:\u003c\/li\u003e\n\u003cli\u003eFitment: Sport\/Sahara Fenders: 35\" (with 3\" front \u0026amp; 2.5\" rear bump stops)\u003c\/li\u003e\n\u003cli\u003eFitment: Rubicon Fenders: 35\" (with 2\" front \u0026amp; 2\" rear bump stops)\u003c\/li\u003e\n\u003cli\u003eFitment: Rubicon Fenders: 37\" (with 2.5\" front \u0026amp; 3\" rear bump stops)\u003c\/li\u003e\n\u003cli\u003eHeight: 23\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 27.5 Hours (28.5 Hours w\/ shocks)\u003c\/li\u003e\n\u003cli\u003eLength: 41\u003c\/li\u003e\n\u003cli\u003eProduct Image Size: Default\u003c\/li\u003e\n\u003cli\u003eNote: Requires aftermarket wheels with 4.75\" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.\u003c\/li\u003e\n\u003cli\u003eNote: Models with plastic bumpers require removal of bumper-to-fender wind deflector\/splash guards to fit 35\" or larger tires.\u003c\/li\u003e\n\u003cli\u003eNote: Sport\/Sahara Fenders Require 3\" Front And 2.5\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003cli\u003eNote: Rubicon Fenders require 2\" Front and 2\" Rear Bump Stop Extensions (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003cli\u003eNote: Rubicon Fenders require 2.5\" Front and 3\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37\" tires.\u003c\/li\u003e\n\u003cli\u003eNote: Alignment required.\u003c\/li\u003e\n\u003cli\u003eNote: Requires longer shocks (NOT INCLUDED)\u003c\/li\u003e\n\u003cli\u003eNote: Falcon Performance Shocks recommended.\u003c\/li\u003e\n\u003cli\u003eFeatured: No\u003c\/li\u003e\n\u003cli\u003eWidth: 30\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e\u003c\/li\u003e     \u003cli id=\"additional-information\"\u003e\u003cdiv id=\"additional-information\"\u003e \u003cspan\u003e WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\/product\" target=\"blank\"\u003ewww.P65Warnings.ca.gov\/product\u003c\/a\u003e\u003c\/span\u003e  \u003c\/div\u003e\u003c\/li\u003e  \u003cbr\u003e \u003cdiv\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cp\u003eJL 2dr: 3.5\" Alpine CT3 Long Arm Suspension System - No Shocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 3.5\" suspension system opens up a new world of tire sizes and off-road possibilities.\u003c\/li\u003e\n\u003cli\u003eLift Height: 3.5\"\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders: 35\" Tires\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders: 35-37\" Tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment and Installation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT include shocks.\u003c\/li\u003e\n\u003cli\u003eFalcon shocks and steering stabilizers sold separately.\u003c\/li\u003e\n\u003cli\u003eRequires aftermarket wheels with 4.75\" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.\u003c\/li\u003e\n\u003cli\u003eModels with plastic bumpers require removal of bumper-to-fender wind deflector\/splash guards to fit 35\" or larger tires.\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders Require 3\" Front And 2.5\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the full product description and installation notes for additional requirements and compatibility details.\u003c\/p\u003e\n\u003cdiv id=\"pdp_tabs_wrapper_mob\"\u003e \u003cul\u003e\n\u003cli\u003eDetails\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv id=\"details\"\u003e\n\u003cp\u003eJL 2dr: 3.5\" Alpine CT3 Long Arm Suspension System - No Shocks.\u003c\/p\u003e\n\u003cp\u003eTeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street \u0026amp; Trail) Suspension Systems.\u003c\/p\u003e\n\u003cp\u003eA 3.5\" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all\" attitude one of our 3.5\" Alpine CT3 Suspension Systems will make it happen. The Alpine CT3 Long Arm features our Alpine Long Control Arms \u0026amp; Brackets as well as a Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets for maximum tunability and flawless performance for years to come.\u003c\/p\u003e\n\u003cp\u003eAdjustable Alpine Long Control Arms balance front caster and pinion angles as well as optimize rear pinion angles anti-squat geometry and tire position on vehicles with 3-6\" lifts. On higher lifts Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms.\u003c\/p\u003e\n\u003cp\u003eThe Front HD Forged Adjustable Track Bar and Front and Rear Track Bar Axle Brackets improve steering response center the axles to optimize vehicle roll center and reduce body roll for improved handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).\u003c\/p\u003e\n\u003cp\u003eAlpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort! A 3.5\" suspension system opens up a new world of tire sizes and off-road possibilities. If you have that do it all\" attitude, our 3.5\" Alpine CT3 Long Arm will make it happen. Features maximum tunability and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment and Installation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shocks and steering stabilizers sold separately.\u003c\/li\u003e\n\u003cli\u003eRequires aftermarket wheels with 4.75\" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.\u003c\/li\u003e\n\u003cli\u003eModels with plastic bumpers require removal of bumper-to-fender wind deflector\/splash guards to fit 35\" or larger tires.\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders Require 3\" Front And 2.5\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders require 2\" Front and 2\" Rear Bump Stop Extensions (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders require 2.5\" Front and 3\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 37\" tires.\u003c\/li\u003e\n\u003cli\u003eAlignment required.\u003c\/li\u003e\n\u003cli\u003eRequires longer shocks (NOT INCLUDED)\u003c\/li\u003e\n\u003cli\u003eFalcon Performance Shocks recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlpine CT3:\u003c\/li\u003e\n\u003cli\u003eLift Height: 3.5\"\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders: 35\" Tires\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders: 35-37\" Tires\u003c\/li\u003e\n\u003cli\u003eCT Long Arm Suspension Systems:\u003c\/li\u003e\n\u003cli\u003eAdjustable Alpine Long Control Arms \u0026amp; Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6\" lift kits\u003c\/li\u003e\n\u003cli\u003eAlpine Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength\u003c\/li\u003e\n\u003cli\u003eOn higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms\u003c\/li\u003e\n\u003cli\u003eBolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits\u003c\/li\u003e\n\u003cli\u003eLong Arm Suspension Crossmember provides additional strength\u003c\/li\u003e\n\u003cli\u003eCross-Trail:\u003c\/li\u003e\n\u003cli\u003eDelivers true Cross-Trail (CT) performance\u003c\/li\u003e\n\u003cli\u003ePositive, responsive handling with reduced NVH\u003c\/li\u003e\n\u003cli\u003eHigh-quality, maintenance-free factory'style bushings provide excellent vibration damping and ride quality\u003c\/li\u003e\n\u003cli\u003eFront HD Forged Adjustable Track Bar and Front (3.5\"+) and Rear Track Bar Axle Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for improved handling\u003c\/li\u003e\n\u003cli\u003eFront and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement\u003c\/li\u003e\n\u003cli\u003eFeatures Front Sway Bar Quick Disconnects\u003c\/li\u003e\n\u003cli\u003eFull range of movement for off-road flex and articulation\u003c\/li\u003e\n\u003cli\u003eInstall and drive, simple bolt-on installation - no welding required\u003c\/li\u003e\n\u003cli\u003eTeraFlex Limited Lifetime Warranty against defects\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 27.5 Hours (28.5 Hours w\/ shocks)\u003c\/li\u003e\n\u003cli\u003eA 3.5\" suspension system opens up a new world of tire sizes and off-road possibilities.\u003c\/li\u003e\n\u003cli\u003eLift Height: 3.5\"\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders: 35\" Tires\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders: 35-37\" Tires\u003c\/li\u003e\n\u003cli\u003eDoes NOT include shocks.\u003c\/li\u003e\n\u003cli\u003eFalcon shocks and steering stabilizers sold separately.\u003c\/li\u003e\n\u003cli\u003eRequires aftermarket wheels with 4.75\" backspacing or less - or Offset Wheel Adapters (# 1057000) for stock wheels - NOT INCLUDED.\u003c\/li\u003e\n\u003cli\u003eModels with plastic bumpers require removal of bumper-to-fender wind deflector\/splash guards to fit 35\" or larger tires.\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders Require 3\" Front And 2.5\" Rear Bump Stop Extensions and Shims (INCLUDED) to fit 35\" tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits:\u003c\/li\u003e\n\u003cli\u003eJL Wrangler (2-door)\u003c\/li\u003e\n\u003cli\u003eSpecs:\u003c\/li\u003e\n\u003cli\u003eLift Height: 3.5\"\u003c\/li\u003e\n\u003cli\u003eMax Tire Diameter:\u003c\/li\u003e\n\u003cli\u003eSport\/Sahara Fenders: 35\" (with 3\" front \u0026amp; 2.5\" rear bump stops)\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders: 35\" (with 2\" front \u0026amp; 2\" rear bump stops)\u003c\/li\u003e\n\u003cli\u003eRubicon Fenders: 37\" (with 2.5\" front \u0026amp; 3\" rear bump stops)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/li\u003e","brand":"TeraFlex","offers":[{"title":"Default Title","offer_id":53633784053941,"sku":"1523100","price":4404.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/1939\/0052\/files\/1523100-v1-20210104-web.jpg?v=1793304070","url":"https:\/\/spyderoffroad.com\/products\/jl-2dr-teraflex-3-5-alpine-ct3-long-arm-suspension-system-no-shocks-1523100","provider":"Spyder Off-Road and Performance","version":"1.0","type":"link"}