JK: Adams Driveshaft Extreme Duty Rear 1310 CV Driveshaft – Solid U-Joints

New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.

Fitment: 2007–2018 Jeep JK Wrangler, 2- or 4-door, Rubicon or non-Rubicon. Select 2 Door or 4 Door.

Notes:

• Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle
• This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Series].

Features:

• Made out of 2 1/2" X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
• Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
• Built only with Components made by Spicer and Neapco.
• Has the Strongest Solid U-joints on the Market.
• Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
• Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

Includes:

• [1] 2 1/2" X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.
• [1] American Made 1310 Rear Transfer Case Output Shaft Yoke.
• [1] American Made 1310 Rear Dana 44 Pinion Yoke.
• [1] Set of Heavy Duty 1310 U-bolts.
• [1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.

Driveshaft comes painted Gloss Black Show Quality.

Measurement: Custom-built driveshaft. Adams has the measurements for most JKs up to a 4.5" lift. If you have coil-overs, a Rock Krawler lift kit, a lift over 4.5", or a swapped transfer case or differential (e.g. Dynatrac, Atlas), a measurement taken at ride height will be needed. Please include your Year, Make, Model and Lift Size in the order notes.

Adams Warranty: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov