JK: Adams Driveshaft Heavy Duty Rear 1350 CV Driveshaft – Greasable U-Joints

New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 CV Driveshaft with Greaseable U-joints made by Adams Driveshaft.

Fitment: 2007–2018 Jeep JK Wrangler, 2- or 4-door, Rubicon or non-Rubicon, up to a 4" lift. Select 2 Door or 4 Door.

Notes:

• Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle
• This 1350 CV driveshaft will work up to 42" Tall Tires.

Includes:

• [1] 1350 Greaseable U-joint 2 1/2" X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
• [1] 1350 Rear Transfer Case Output Shaft Flange Yoke.
• [1] 1350 Rear Dana 44 Pinion Yoke.
• [1] Set of 1350 U-bolts.
• [1] Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.

Driveshaft comes painted Gloss Black Show Quality.

Measurement: Custom-built driveshaft. Adams has the measurements for most JKs up to a 4.5" lift. If you have coil-overs, a Rock Krawler lift kit, a lift over 4.5", or a swapped transfer case or differential (e.g. Dynatrac, Atlas), a measurement taken at ride height will be needed. Please include your Year, Make, Model and Lift Size in the order notes.

Adams Warranty: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov