JL: Adams Driveshaft Extreme Duty Front 1350 CV Driveshaft – Dana 60 Swap – ASDJL-1350F-S-D60ULT
New Front Extreme Duty Jeep JL Wrangler Rubicon, Sport, and Sahara Models with a Dana 60 Swap 1350 Series Half Round CV Driveshaft. Custom made by Adams Driveshaft.
Fitment: 2018+ Jeep JL Wrangler Rubicon, Sahara and Sport, 2- or 4-door, with a Dana 60 front axle swap. The differential must have a 1350 pinion yoke.
Notes:
- Due to Jeep changing their angles on the JT and JL Models, if you install an After Market Differential and the driveshaft spins full-time, it may result in a vibration and/or premature U-joint and CV failure due to angles.
- Must have a 1350 pinion yoke on the differential.
- This Extreme Duty Series Solid 1350 CV Driveshaft will work up to 42" Tall Tires.
- This Driveshaft will work up to a 4" Lift after that the angle may be too Severe or it may Bind.
- Requires a 1350 pinion yoke on the Dana 60. Adams also offers a forged U-bolt style Dana 60 yoke (sold separately).
- Adams needs a center-of-U-joint to center-of-U-joint measurement taken on the ground at ride height (coil-over setups need collapsed, ride height and full extension measurements).
Features:
- Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
- Built only with Components made by Adams Forged Parts, Spicer and Neapco.
- Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint we replace it.
Includes:
- [1] 2" X .120 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints, with a OEM Style Flange. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.
- [1] American Made Front 1350 Half Round Transfer Case Output Shaft Yoke.
- [4] Grade 10 CV bolts.
- [1] Adams Driveshaft T-shirt
Driveshafts come painted Gloss Black Show Quality.
Adams Warranty: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The U-joints, CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the U-joints, CV Kit, or Slip n Stub are not maintained properly.
CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
